TANKiT®

TANKIT® is a wet lay-up patching repair system designed to reinforce tanks and pressure vessels, restore original asset integrity and prevent further deterioration.

EMERGENCY COMPOSITE REPAIR SOLUTION
FOR TANK AND PRESSURE VESSEL REINFORCEMENT

Product Sheet

TANKiT^® is an emergency and temporary reinforcement solution designed to reinforce tanks and pressure vessels, restore original asset integrity and prevent further deterioration.

TANKiT^® is a pre-engineered composite solution made of five Kevlar^® patches impregnated with 3X specific resin. It can be applied without shutdown, unless active leakage.

This product is ready to use and does not require calculations. It can be used in specific conditions (up to 100mm defect size and maximum temperature +70°C).

Onshore / Offshore Topside

External corrosion

Internal corrosion

Through wall defect,
Leak, Hole

Mechanical damage,
Dent, Crack…

Uses

Repair external/internal corrosion
Repair through-wall defects up to 100mm
Stop the corrosion (if external defect)

Applications

Onshore and offshore installations
Various tank designs and up to 20m tank diameter
Temperature up to +70°C (+158°F)
Compatible with most common fluid and gas

Benefits

No engineering, no calculations (ready-to-use)
Online repair (no loss of production)
Cold welding system, no heating or post-curing required
Versatile product with a large range of applications (storage and GRP tanks, pressure vessels, separators, columns)
Cost effective and easy to store

Use	TANK & PRESSURE VESSEL REINFORCEMENT – ONSHORE & OFFSHORE
Service temperature	-50°C / +70°C (-58°F / +158°F)
Application temperature	+10°C / +70°C (+50°F / +580°F)
Maximum tank diameter	Up to 20m
Maximum hole size	Up to 100mm
Maximum pressure	Depends on tank and defect diameter – See charts below (TANKiT® capacities)